Applications:
※Car starter gear;
※Precision motors, reduction gears; anti-friction lubrication of worm gears and worms;
Features:
※High load carrying capacity; suitable for long-term lubrication;
※Has good oxidation resistance; good water shower resistance;
※Good corrosion resistance; good wear resistance;
※Solid lubricants and EP extreme pressure agents provide wear protection in mixed friction conditions.
The main technical parameters:
Project | Parameter | Test Standard | |
Exterior | Black smooth ointment | Visual inspection | |
Operating temperature range(℃) | -50~150 | -- | |
Penetration1/10mm | 265-295 | ASTM D217 | |
NLGI grade | 2 | ASTM D217 | |
Density 25℃ | 0.91 | ASTM D1480 | |
Dropping point °C greater than | 190 | ASTM D2265 | |
Oil separation 24h 100℃ | <4.5% | FTM 791B,321、2 | |
Volatility 24h 100℃ | <0.3% | ASTM D972 | |
Water splash test 60mm 40℃ | <3.5% | ASTM D1264 | |
Resistant to copper corrosion 24h 、100℃ | 1A | ASTM D4048 | |
Four ball test (60min 、1200rpm 、800N) | 0.46mm(75℃) | ASTM D2266 | |
—(150℃) | |||
Four-ball load | 3600N | ASTM D2266 | |
OK load | 15500N | ||
OK load friction | 3150N | ||
Low temperature torque(-40℃)gm-cm | Start up | 1380Nm | ASTM D1478 |
Run 10min | 440Nm | ||
Run 60min | 270Nm | ||
Rust test | — | ASTM D1743 |
(The above data is for reference only and does not have the nature of a contract.)
Please fill in your message, we will reply as soon as possible!