SINCE 1994
26 years of professional grease research and development manufacturers
SINCE 1994
26 years of professional grease research and development manufacturers
Solution overview:
Rails FAQ:※、The low temperature performance is not good, and the feel suddenly becomes heavier when the temperature is lower;※、There is abnormal noise;※、Heavy-duty slides, grease is easily lost, resulting in noise;※、Corrosion occurs in the plastic wheels of invisible slide rails, and the product quality does not meet the requirements;※、Under high temperature conditions, grease i...
Solution overview:
The Main Lubrication Problems of The Buffer:※The viscosity-temperature performance in the range of -20 to 40 degrees Celsius should be excellent, the change is not large, and the change curve is gentle;※According to the corresponding damper products, the slow down speed can be guaranteed to be completed within the specified time;※During the cycle test, the viscosity of the grease does...
Solution overview:
The Main Lubrication Problems of Electric Push Rod Gears:※The noise is large, and the noise reduction effect of the grease during the rotation of the gear is not good;※The grease on the screw is accumulated to both ends, and there is no grease on the screw;※The extreme pressure resistance of grease is not strong, and the grease is easy to lose;※Incompatible with plastic gears, resu...
Solution overview:
The main lubrication problems of toy plastic gears:※、The noise is large, and the noise reduction effect of the grease during the rotation of the gear is not good;※、Continuous noise reduction is poor, and the noise increases after the gear runs for a period of time;※、Small current, the consistency and viscosity of the grease are not suitable, resulting in increased current or even crash;※...
Solution overview:
The plane bearing is installed on the top of the shock absorber, between the spring and the top rubber of the shock absorber, and it can rotate freely under the pressure of up and down.
Solution overview:
Problems with micromotor lubrication:※、After the motor is placed for a long time, the grease on the brush will dry out, so that the noise reduction effect cannot be achieved;※、After the motor is installed for a long time, the brush is rusted and corroded, and the anti-rust and anti-corrosion function cannot be achieved;※、Low voltage can not start, need external force to help the motor to...
Solution overview:
Principle of planetary reducer: The drive source (motor) starts the sun gear in a direct connection, and the sun gear drives the planetary gears combined on the planetary gear carrier to run. The whole group of planetary gear system rotates automatically along the outer gear ring, and the planet carrier is connected to the output shaft to achieve the purpose of acceleration. Higher reduction r...
Solution overview:
Fluorine grease has stronger abrasion resistance, water resistance, acid and alkali resistance washout, low volatility and low diffusion. It can maintain long-term lubrication at a high temperature of 290 ° C and is resistant to nuclear radiation. In addition, at high temperatures, even as the base oil dries out, the PTFE particles still lubricate and continue to protect components from ...
Solution overview:
Continuous noise reduction is poor, and noise occurs after the door limiter works for a period of time;Strict long-life lubrication requirements, the grease of the door stopper volatilizes too quickly, and dries out after a period of time, and the lubrication is not enough, resulting in sticking, large resistance, and unclear gear position;
Solution overview:
Contacts are prone to arcing at the moment of on and off;For sliding contacts, metal-to-metal friction requires grease with good lubricity;
