Applications:
※It is used to reduce friction and eliminate abnormal noise of metal, plastic and rubber sliding parts that need clean and lubricated, such as slide rails, telescopic lenses, shafts, connectors, card holders, antennas, springs, etc.
Features:
※Drainage, moisture-proof, protect metal from rust, good compatibility with most plastics and elastomers;
※The film layer does not flow, does not absorb dust and dirt particles, does not burn, is odorless, and has high safety;
※Good high and low temperature performance, fast film formation (about 15 to 30 seconds at room temperature), and uniform film coverage;
※Excellent dry lubricity, low coefficient of friction, good wear resistance, and no oil diffusion.
Index Parameter:
Project | Quality Index | Test Standard |
Exterior | Translucent homogeneous liquid | Visual inspection |
Density(25℃) | 1.6g/cm3 | ASTM D1480 |
Flash point | None | ASTM D92 |
Viscosity(25℃) | 45 sec | ASTM D445 |
Low temperature torque N.CM -20℃ Revolving -20℃ Starting -40℃ Revolving -40℃ Starting |
2.0 2.5 4.5 3.1 | ASTM D1478 |
Global warming factor(GPW)(C02=1) | 500 | - |
Ozone layer damage factor(ODP) | 0 | - |
Friction coefficient | 0.05µ | ASTM D5183 |
Mechanical impurities | None | Microscope |
(The above data is for reference only and does not have the nature of a contract.)
Please fill in your message, we will reply as soon as possible!