Low Temperature Plastic Gear Grease

Product Details

Applications:

※Various plastic gears

※Lubrication and noise reduction of worm gears

Features:

※Excellent water resistance, good oxidation stability;

※Shear stability and colloidal stability;

※It has good adhesion and wear resistance, and can eliminate gear noise for a long time.

The Main Technical Parameters:

Project		Parameter	Test Standard
Exterior		White translucent	Visual inspection
Operating temperature range（℃）		-40～150	--
Penetration 1/10mm		315～345	ASTM D217
Base oil viscosity（40℃）		360	ASTM D445
Base oil viscosity（100℃）		25	ASTM D445
NLGI grade		1	ASTM D217
Density 25℃		—	ASTM D1480
Dropping point °C greater than		>195	ASTM D2265
Oil separation 24h 100℃		<2.5%	FTM 791B,321、2
Volatility 24h 100℃		<0.28%	ASTM D972
Water splash test 60mm 40℃		—	ASTM D1264
Resistant to copper corrosion 24h 、100℃		1A	ASTM D4048
Four Ball Test (60min 、1200rpm 、392N)		1370N（75℃）	ASTM D2266
		— （150℃）
Low temperature torque（-40℃）gm-cm	Start up	294mN.m	ASTM D1478
	Run 10min	140mN.m
	Run 60min	--
Antioxidant properties 100h、100℃		0.02Mpa	ASTM D942
Rust test		—	ASTM D1743

（The above data is for reference only and does not have the nature of a contract.）