Abrasive wear: mechanical wear caused by two contact surfaces sliding against each other Additives: Small amounts of substances added to improve lubricating properties Adhesion Improvers: Additives to oils and greases to improve adhesion (eg polyisobutylene) Adhesion lubricant: Add adhesion improver to prevent the lubricant from being thrown off due to centrifugal force AF coating: anti-...
2020-06
Basic Concept of Grease(1) What is grease The latest definition of NLGI (National Lubricating Grease Institute): Grease is a solid or semi-solid product formed by dispersing one or more thickeners into one (or several) liquid lubricating oils . To improve certain properties, some other components (additives or fillers) are added.(2) Thixotropy of grease When an external force is ...
2020-06
U.S. base oil production fell 9% in 2019, according to recent data from the Energy Information Administration. Total lubricant base oil production fell to 60.9 million barrels in 2019 from 67.3 million barrels in 2018.
2020-05
With the increase in supply, the cost of lubricating oil factories is expected to be further reduced; the import of base oil has dropped significantly year-on-year, and the export has increased significantly.
2020-05
Longzhong data shows that the total production of base oil in April was 726,450 tons, an increase of 18% from the previous month. In April, the total output of paraffin base oil was 310,500 tons, naphthenic base oil was 133,600 tons, and the second-class base oil accounted for 83% of the total output. The operating rate in April was 45.4%, an increase of 8.87% from the previous month.
2020-05
China Petroleum News "The era of easy exploitation of oil and gas has come to an end, and the sustainable development of the oil and gas industry is increasingly dependent on technological innovation. In 2012, the number of first patent applications in the global oil and gas field reached a peak of 25,807, and patent applications with priority in China accounted for 25,807. 54%. China has become the main force of technology research and development in the global oil and gas field.” On September 18, China Petroleum Economic and Technological Research Institute, the largest petroleum economic technology information resource center in China, released the “Foreign Petroleum Technology Development Report (2014)” in Beijing. (hereinafter referred to as the "Report").
2020-05
The mixing of different greases in the use of grease is unavoidable, but it should be noted that the change in properties after mixing does not affect the use. When the sealed bearing is sealed with high-grade long-life grease at one time, it can prolong the life of the grease and prevent contamination, and avoid the trouble of regular grease, which is the most ideal. However, some bearings...
2020-05
The commonly used additives for lithium-based grease are similar to other greases, but lithium-based grease uses a wider range of additives, and it has good compatibility with many additives. Commonly used additives mainly include antioxidants, metal surface passivators, preservatives, structural modifiers, extreme pressure antiwear agents, color stabilizers, and wire drawing enhancers. 1. Ant...
2020-05
When the operating temperature of the bearing increases by 10~15℃, the bearing life of the grease will be reduced by half; select the grease for high temperature and focus on the performance of the dropping point, evaporation, oxidation stability and high temperature baking test of the grease. The selection of low temperature grease should pay attention to the similar viscosity and low temperature torque at low temperature. Effect of temperature on oxidation rate
2016-10
Correctly lubricating the open gear is a necessary condition to ensure the normal operation of the gear, to ensure that the open gear obtains the best bearing capacity and smooth transmission, correct processing and manufacturing, and accurate alignment of the transmission device. So how to choose the correct starting gear grease?
2016-10